|
|||||||
|
|
|
|||||
|
|
|||||||
Start at the
#1 possible solution. I that does not
correct the problem then goto step #2, then #3, etc.
PVC REPAIR
When gluing two pieces of pvc together make sure the cuts are clean and straight. Remove any
burs prior to gluing. First use the primer or cleaner on both pieces (do not use too much as this
will weaken the joint). Next use the cement spreading it on both pieces as well (again do not use too much).
Slide the two pieces together giving a full circle twist. Hold for 30 seconds. (one caution on using
Pvc glue and primer, this stuff smells horrible only use in well ventilate areas, also very flammable,
Also if this gets in your eyes or on your skin it will BURN. I have had it in my eyes and on my skin, trust me!)